On 1 Combination - Canon MF4010 Series Advanced Manual

Advanced Copy
Features 1
System Monitor
2
Troubleshooting
3
Appendix
4
Table of Contents
Index
■

2 on 1 Combination

2 on 1 combination automatically reduces two documents to fit
on A4 or LTR size paper. This feature can be used with "Collate
Copy" (see p. 1-2).
Originals
1
1
2
1.
Set the first page of the document on the
platen glass.
2.
Press [COPY].
3.
Press [Collate/2 on 1].
Copy
2
Back Previous
4.
Use [ ] or [ ] to select <2 ON 1>, then
press [OK].
If you want to use <2 ON 1> with "Collate Copy" (see p. 1-2) at
the same time, select <COLLATE+2 ON 1>, then press [OK].
5.
Use the numeric keys to enter the desired
copy quantity (1 to 99).
6.
Press [Start].
7.
Place the next page of the document on the
platen glass, then press [Start].
8.
When scanning is complete, press [OK].
NOTE
– If you press [OK] without scanning the second document, only
the first document will be printed on the left side of the paper.
– A maximum of 4 mm margin will be produced between the two
reduced documents in 2 on 1 combination copying.
– To cancel all settings, press [Stop/Reset].
TOP
Next
1-3