Avaya 1220 User Manual page 140

Operating your Avaya 1220 IP Deskphone
Using Automatic Preselection (Meet-Me page)
Perform the following procedure to use Automatic Preselection.
(Goodbye)
or
Using Automatic Post-selection
The called party is either busy on the Avaya 1220 IP Deskphone or away
from their desk. To page the called party, you need not redial the number
of the called party.
RadPag
140
1. Lift the handset.
2. Dial the Radio Paging Access
You hear the paging tone (two beeps
followed by a dial tone).
3. Dial the number of the party you want to
page.
After dialing, you hear the ringback tone.
The paged party can use any
IP Deskphone to enter a
Answer FFC and their own DN number.
4. If your call remains unanswered for a
preset time period, during which you
hear a 15-second high-pitched tone
sounds followed by silence, press the
Goodbye key or replace the handset.
1. Press the RadPag
You hear a special dial tone.
FFC.
Radio Paging
soft key.