Table of Contents
Advertisement
10 Accessories – Optional Equipment
N
AME
Spring sleeve cpl.
Support ring
Operating Screwdriver with a Finder:
Installation of the Finder (optional equipment):
• Remove screw-cap (left-hand thread) from spring sleeve
• Insert finder and spring into spring sleeve
• Re-attach screw-cap onto spring sleeve (left-hand thread) and attach
complete spring sleeve package to Screwdriver
Assembly of Support Ring 389775 A
For better driver support and to allow an increased down-pressure force, the
support ring 389775 A may be installed as follows:
1.
Disconnect Screwdriver from air supply.
2.
Unscrew complete clutch bearing (left-hand thread).
3.
Remove the O-rings 802480 and 828074.
4.
Slide the support ring over the clutch bearing according to illustration and
install the o-ring 828074 into the appropriate recess.
5.
Tighten the complete clutch bearing with support ring 389775 A to the
Screwdriver.
Please check, if screwdriver starts running when connected
directly to the air supply.
28
P
N
.
ART
O
364672 A
389775 A
Hide quick links:
Advertisement
Table of Contents
