Dynojet POWER COMMANDER V Installation Instructions Manual page 3

fig.a
Remove
fig.b
fig.c
19-006 www.powercommander.com
1 Remove the seat.
2 Remove both sidecovers (Fig. A).
3 Install the PCV on the right side of the motorcycle using the supplied velcro.
Make sure to clean both surfaces with the alcohol swab before attaching
(Fig. B).
4 Route the PCV harness to the left side of the bike. Keep the PCV harness as
close to the frame as possible (Fig. B).
5 Route the PCV harness along the backbone of the frame along the left side of
the bike and go towards the throttle body (Fig. C).
2009 Victory Vision models PCV - 3