Download
Share
Print this page
Dynojet POWER COMMANDER V Installation Instructions
  1. Manuals
  2. Brands
  3. Dynojet Manuals
  4. Automobile Accessories
  5. Power commander V
  6. Installation instructions

Dynojet POWER COMMANDER V Installation Instructions

2017 honda crf450r/rx
Hide thumbs Also See for POWER COMMANDER V:
1
2
3
4
5

Advertisement

Quick Links

Download this manual See also: Installation Instructions & Owner's Manual, Instruction and Installation Manual
2017 Honda CRF450R/RX
I n s t a l l a t i o n I n s t r u c t i o n s
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
16-066
www.powercommander.com
2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
PARTS LIST
1
Power Commander
1
USB Cable
1
Installation Guide
2
Power Commander Decals
2
Dynojet Decals
2
Velcro strips
1
Alcohol swab
THE IGNITION MUST BE TURNED
OFF BEFORE INSTALLATION!
THE LATEST POWER COMMANDER
SOFTWARE AND MAP FILES CAN BE
DOWNLOADED FROM OUR WEB SITE AT:
www.powercommander.com
2017 Honda CRF450R/RX - PCV - 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWER COMMANDER V and is the answer not in the manual?

Questions and answers

Related Manuals for Dynojet POWER COMMANDER V

Summary of Contents for Dynojet POWER COMMANDER V

  • Page 1 Power Commander USB Cable Installation Guide Power Commander Decals 2017 Honda CRF450R/RX Dynojet Decals I n s t a l l a t i o n I n s t r u c t i o n s Velcro strips Alcohol swab THE IGNITION MUST BE TURNED OFF BEFORE INSTALLATION!

  • Page 2: Usb Connection

    POWER COMMANDER V INPUT ACCESSORY GUIDE ACCESSORY INPUTS Map - (Input 1 or 2) The PCV has the ability to hold 2 different base maps. You can switch on the fly between these two base maps when you hook up a switch to the MAP inputs. You can USB CONNECTION use any open/close type switch. The polarity of the wires is not important. When using the Autotune kit one position will hold a base map and the other position will let you activate the learning mode. When the switch is “CLOSED” Autotune will be activated. (Set to Switch Input #1 by default.) Shifter- (Input 1 or 2) These inputs are for use with the Dynojet quickshifter. Insert the wires from the CRANK Dynojet quickshifter into the SHIFTER inputs. ANALOG The polarity of the wires is not important. (Set to Switch Input #2 by default.) SPEED EXPANSION PORTS 1 & 2 INPUT 2 (Grnd)
  • Page 3 FIG.A Remove Remove the seat, side covers, and radiator shrouds. Remove the engine mounting bracket on the left side of the bike (Fig. A). Remove the fuel tank. Remove Remove The fuel tank does not need to be removed entirely. You can just loosen it. You need to be able to access the fuel injector. Remove FIG.B Use the supplied Velcro to secure the PCV module to the top of the rear fender just behind the airbox (Fig. B). Clean surfaces with the supplied alcohol swab before attaching the Velcro. Route the PCV wiring harness forward towards the engine following along the left side frame rail. FIG.C Unplug Unplug the Fuel Injector (Fig. C). 16-066 www.powercommander.com 2017 Honda CRF450R/RX - PCV - 3...
  • Page 4 FIG.D Plug the PCV wiring harness in-line of the Fuel Injector and the stock wiring harness (Fig. D). FIG.E Unplug the Throttle Position Sensor at the left side of the throttle body (Fig. E). This connector can be difficult to access. It is a BLUE 3-pin connector. FIG.F Plug the PCV wiring harness in-line of the TPS and the stock wiring harness (Fig. F). 16-066 www.powercommander.com 2017 Honda CRF450R/RX - PCV - 4...
  • Page 5 FIG.G Unplug the stock Crank Position Sensor connectors (Fig. G). This is a BLACK 6-pin connector pair. It is located behind the engine mounting bracket that was removed in step 1. It is covered with a BLACK rubber boot. FIG.H 10 Plug the PCV wiring harness in-line of the stock Crank Position Sensor connectors. 11 Reinstall the left side engine mounting bracket (Fig. H). FIG.J Ground 12 Secure the PCV ground wire with the small ring terminal to the stock common ground bolt on the left side of the frame (Fig. J). 13 Reinstall the fuel tank, seat, and side covers. 16-066 www.powercommander.com 2017 Honda CRF450R/RX - PCV - 5...