Iridium GO! User Manual page 23

Status Indicator LED
The status indicator at the top of Iridium GO! has the following meanings:
LED Description
Flashing Green Unit is ON and registered to Iridium network
Flashing Red Unit is ON and not registered to Iridium network
Red Iridium GO! is powering ON
Alternating red and green Call in progress; ringing, dialling or in a call
Slowly flashing RED SOS has been triggered
OFF Unit is OFF
Firewall Settings
Iridium GO! has an inbuilt firewall system that blocks non-essential internet traffic when an Internet
Call is in progress.
Firewall settings can be adjusted depending from Advanced Settings Portal, 'Communication' ➡
6
'Firewall' .
38 Iridium GO! User Manual
Factory Defaults
To restore Iridium GO! device back to original factory defaults.
1. Turn on Iridium GO!
2. Open the External Antenna cover.
3. Use a paperclip or similar point and press gently inside the Restore button hole.
4. Follow the screen menu prompts to reset settings to factory defaults.
Important: All previous settings will be lost, the SSID will be reset, and new users will be deleted.
Upgrading Firmware
Please check the Iridium website or your Service Provider if a new release of firmware is available.
Download the firmware to your computer, and the firmware can be upgraded from Advanced
Settings Portal, 'System' ➡ 'Firmware' .
6
Iridium GO! User Manual 39