Iridium GO! User Manual page 12

Installing the SIM Card
1. Remove the battery cover with a flat blade screw-driver, or a small coin.
2. Slide SIM card-holder toward the hinges, and lift to open.
3. Insert SIM card into slot.
4. Close card-holder and slide it away from the hinges to lock.
Installing the Battery
1. Install the battery with the gold battery contacts facing down over the 4 connector fingers.
2. Replace the battery cover, and ensure screws are firmly tightened to maintain correct water
resistant seal.
4
Charging Your Battery
1. Open the USB cover and firmly plug in the USB cable.
2. Connect the USB cable to the Universal Travel Charger, or Car Charger.
3. When charging is complete, close the USB cover to maintain water resistant seal.
NOTE:
1. The battery will automatically stop charging in very low or high temperatures. (Standard Li-Ion charging range between 0°C to
45°C battery temperature)
2. Charge time of 4 to 5 hours using the AC Travel or Car Charger.
3. Iridium GO! can be charged from the USB port of your PC, Laptop or USB hub (500mA port or higher). Please use the supplied USB
cable. Charging will take longer.
16 Iridium GO! User Manual
Installing the SIM Card
Charging the Battery
TIP!
While the battery compartment is open, record the SSID number "IRIDIUM-xxxxxx" from the
serial label – this will be used to connect your device to Iridium GO! Wi-Fi.
Installing the Battery
4
Iridium GO! User Manual 17