List of Barcodes for the P-touch Template Function
List of Barcodes for Specifying Settings
These are the barcodes for specifying settings used in Printing Labels Using P-touch Template on page 30.
Note
• When using the barcodes in this list, set "Trigger for P-touch Template Printing" and "Command Prefix
Character" to the factory settings in the P-touch Template Settings tool.
• When printing barcodes that will be scanned for printing labels, print the barcodes at a high resolution.
• It is possible that these sample barcodes may not be read correctly, depending on the quality of your
printout.
P-touch template command (initialize + begin specifying settings)
Basic settings
Auto cut on
Half cut on
Chain printing on
Mirror printing on
Number of copies
Auto cut off
17
Half cut off
17
Chain printing off
17
Mirror printing off
17
17
17
17
17
17
17
17
121