Table of Contents
Advertisement
Printing Labels Using P-touch Template
d
Scan the "P-touch template command (Initialize + begin specifying settings)" barcode.
See List of Barcodes for the P-touch Template Function on page 120.
e
From the list of barcodes under "Basic settings", scan each barcode to send a command or setting to the
P-touch Label Printer.
Note
• Settings can be made with multiple commands.
• If no settings have been made by scanning the barcode commands, a template will be printed using the
P-touch Template settings. The default P-touch Template settings are to print a single copy with "Auto cut"
turned "On".
For more information on P-touch Template Settings, download P-touch Template Manual/Command
Reference (English only) from the Brother Solutions Center at support.brother.com
[Select your region/country.] - [Manuals] - [Choose your product]
• To specify the number of copies you want, scan the "Number of copies" barcode, and then scan the
barcodes under "For entering numbers" to specify a three-digit number.
Example:
Specify numbers by scanning the following barcodes: 7i[0][0][7], 15i[0][1][5]
• To change the setting for the number of copies, scan the "Number of copies" barcode again, and then scan
the barcodes for the new three-digit number.
f
Scan the barcode under "Preset template number" with the same number as the [Key Assign] number
for the label layout you want.
g
The specified label is printed.
5
36
Advertisement
Table of Contents
