Table of Contents
Advertisement
Changing the P-touch Label Printer Settings
c
Check that the P-touch Label Printer you want to configure appears next to [Printer]. If a different printer
appears, select the P-touch Label Printer you want from the drop-down list.
Note
If only one P-touch Label Printer is connected, it is unnecessary to make a selection because only that
P-touch Label Printer is available.
d
Select the setting you want to change, and then specify or change the settings in the dialog box.
For more information on the settings dialog boxes, see P-touch Template Settings on page 27.
e
Click [Apply] - [Exit] in the settings dialog box to apply the settings to the P-touch Label Printer.
f
Click [Exit] in the main window to finish specifying settings.
Important
Use the Printer Setting Tool to configure the P-touch Label Printer only when the P-touch Label Printer is
in standby. The P-touch Label Printer may malfunction if you try to configure it while it is handling a job.
4
19
Advertisement
Table of Contents
