System Login - EasyN H Series User Manual

In the interface above, the configuration information of the current computer is listed on
the left side; and the network configuration information of the selected device is listed on the
right side. Default IP address of the IP camera is 192.168.1.126, and HTTP port is 81.
Inner Access refers to the LAN access address; Outer Access refers the WAN access
address. 。
Tips:Port forwarding setting is necessary for outer access,please refer to
Note： ： ： ：
1. Device information indicates the IP camera information. 2. When the
current computer has a fixed IP, (namely non-DHCP IP), and the IP
camera is used for the first time, please click automatic setup, so that IP
address of the IP camera, gateway and DNS can be synchronous with the
PC.
3. If it is necessary to manually modify the contents including camera
name, HTTP port, IP address, sub mask, gateway, primary DNS
server, secondary DNS server and so on, please click apply after
modification, and then click OK after entering username and password of
the IP camera in the pop-up dialog box for access validation.

5.3.System login

1. Open the Web page. You can open it directly by first clicking the Inner Access or Outer
Access on Finder and then clicking Open; and you can also directly input the corresponding
address of the inner and outer access into the address bar of the web page, as the address
shown in the picture above http://192.168.1.126:81 (LAN); and
2. If the IP camera has been connected with the outer network when you are browsing it, the log-in
interface as below will appear when you open the web page through LAN or outer work.：
'router port forwarding 'in 7.1 section.
We never stop trying!
http://aodn.ipcam.hk (WAN)
13