9.
Others
9.1 Port Forwarding Settings in router
When a remote access via internet visit, port forwarding in router is a must, different brands
routes have different name, but the operation is the same.
Take the TP-LINK TD-8840 router port mapping setting as example. To set up IP Camera as
an example: router inner web IP is 192.168.1.1, IP camera inner web address is 192.168.1.50,
and port is 80.
1. First log in router web administration interface.
2. Click in front of left side "Advanced Setup"
Click "virtual server" in the unfolded menu.
3. fill "80" under the right port start or port end, Server IP address fill
"192.168.1.50", protocol select "TCP/UDP"OR""TCP", finally don't forget
click under ""save/apply"
When complete port forwarding, you can visit camera through device code in
outer net remotely;
Common router default visit address
1. DLINK ex-factory definition router address is 192.168.0.1
We never stop trying!
35