Brief Introduction To Super Client; Installation And Registration; Add Equipment - EasyN H Series User Manual

6.Brief introduction to Super Client

The introduction in the previous is on how to browse the IP camera through web page. The Super
Client software is a Multi view Software to implement centralized management on the IP camera.
It has powerful fuctions, high extensibility. It can add the F,F1,M, H,H2 and H3 series products
into it. Now we are going to make a brief introduction the use of H3 series product in the Super
Client.

6.1. Installation and Registration

Open the CD, and install the Super Client software, then the shortcut icon
on the desktop, double click the shortcut to open the software. If you are the first time to use it, the
registration tip will appear. Click registration; input the registration code in the label on the CD
surface for registration. Or skip this step, and click the icon
Super Client to registrate.

6.2.Add equipment

Right--click the blank area on the right part of the Super Client to add an IP Camera, choose
H3 series, and click ok.
When finish adding camera, if needs to change other settings, please select the camera, and
click the right key to choose equipment setting and then set the parameters, also users can
click one monitor screen, then click
finished include the basic information, equipment parameters, alarm, record, action plans,
additional information. The following text we will give you a more detailed explanation.
We never stop trying!
in the lower right corner of
choose H3 series
to set the camera. The information need to be
26
will appear