Sony SAT-HD300 Operating Instructions Manual page 77

8-8. Managing Channels
Aut@ Pmgram (Charmel
::selUCln,
Automatically finds all channels (both analog and digital) available through the antenna and
cable inputs, and stores all the active channels in the channel list. Inactive or weak channels
may not appear in the list. In that case, add missing channels manually in the Manual Ch. Add
menu. The channel list created here can be seen in the Favorite/Ch. Edit menu.
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Scroll down using
""f"
on the remote control.
3. Select the Setup menu by pressing" -+- ".
4. Auto Program will be automatically highlighted.
5. Move the highlight to the right with
"If>"
to display the channel find box.
6. Select "Start" button and press"
-+-"
and the moving yellow bar will indicate the progress scan-
ning the channels. When the scanning process begins, "Start" will change to "Next". If you press
"Next", the scanning of the current signal source will be ignored and the scanning of the next sig-
nal source will proceed.
7. When the scanning is completed, the scanned result will be displayed.
it Press the EXIT button on the remote control if you want to return to TV viewing.
76