Sony SAT-HD300 Operating Instructions Manual page 76

8=7. hdtializingthe System
threesig-
adjust the dish to the cor-
Depending on the Dish Type that is selected, the Signal Strength
nal strength bars for Satellite Networks A, B, and C, in order to help
rectposition with the elevation, azimuth, andti.ltvalues ed
While the maximum signal strength is 100, there will be
between signal strengths of 60 to 85, The higher the signal, the likely you are to experience
picture quality degradation during adverse weather conditions such rai
A transponder is a receiver/transmitter on the satellite, It receives signals from IRECTV and
retransmits them to your dish. The DIRECTV@ HD Receiver is the signal
strength of most transponders by using the following met!hocI.
l@se® the sig@alstrefi{Jth:
1. Press the MENU button Remote Control display the OtHCreenmenu.
2. Select the DIRECTV® menu by pressing"
+"
on the remote control.
3L Scroll down to Initial Setup menu using
"V",
4. Move the highlight to the right with
"lIP"
to select Signal Strength,
U
-+- ", The signal strength dialogue box will be
5. When the highlight is on the Signal Strength,
displayed.
6. Move the highlight to select the desired transponder and satellite.
7. Press
"<if'
to return to previous menu.
your location in the United States, certain transpone
deI'S may not be available, It is normal for the signal strength level of
afew transponders to be at zero.
75