Sony SAT-HD300 Operating Instructions Manual page 72

8-7. Initializing the System
Step 4. Add l@cal Nl::tw@wk
Adds program information for channels available over the air (terrestrial) in a selected local area as
defined by the satellite service provider. You can select two distinct areas by ZIP code to view the
channels being broadcast from both areas. This is useful if you live between two major broadcast cen-
ters and are capable of receiving signals from both. After this Channel Setup process, the channel list
of over the air stations will be added to the guide.
To Add loc«al Netw@rk:
1, If you want to add over the air digital and analog channels to your guide, select "YES".
Note: If you select "NO", you don't need to do the following process.
2. Press"
-+-"
if your ZIP code is correct for the primary local channels. The channel search progress will be
shown.
3. If the ZIP code is missing or incorrect, select the ZIP code for your city using "",,"and pressing"
-+- ".
4. If you want to add secondary local channels from another area, enter a secondary ZIP code using the digit
buttons on the remote control and press"
-+-".
5. Repeat steps 2 to 4.
6. Press"
-+-"
to move to the next step of the initial setup.
1. Press
"<lj"
to return to the previous level or press the EXIT button on the remote control if you want to
return to TV viewing.
Note: The Add Local Network feature only adds station and program information to the guide. Depending on
your location, such stations may be received by connecting an antenna to the ANT IN jack (see section 3-4).
If off-air digital and analog channel data is selected "YES", then some local analog (NTSC) and digital
(ATSC) channels may appear in the GUIDE for which reception may be poor or not viewable. To hide these
channels, refer to section 8-8 Managing Channels and section 7-2 Advanced Program Guide™
71