Sony SAT-HD300 Operating Instructions Manual page 31

3-5. TV Connection - HD Monitor (DVI-HDTV type)
Phone wall jack
HD-Ready TV
, ,
"
"
......
----
.....
,
\
/' TYPE "\
:ll:
...
" , I
, I
...... "
,
~
,
'...
...'
Antenna
TV Viewing
1. Connect the "OUT TO TV" jack on the DIRECTV® HD Receiver to the "ANT IN" jack on your TV using a coaxial
RF cable.
2. Connect the "DVI-HDTV OUT" jack on the DIRECTV HD Receiver to the "DVI-HDTV IN" jack of your TV using
DVI -typeconnector. (The "TYPE" switch must be set toward the "RGB/DVI-HDTV" jacks.)
3. Connect the L/R "AUDIO OUT" jacks on the DIRECTV HD Receiver to the L/R "AUDIO IN" jacks on your TV using
RCA-type cables.
Note: For best access to high-definition programming from DIRECTV, connect the DVI-HDTV output to a
DVI-HDTV input on your high-definition TV or monitor. A DVI-HDTV input is one that is compliant with
EIA-861 and HOCP specifications. Check your TV or monitor's user manual to find out if the TV or moni-
tor's DVI input is compliant with these specifications.
30