Sony SAT-HD300 Operating Instructions Manual page 27

3-4. Connecting to Antennas - Oval Dish (Satellite A, H, C)
Antenna
Cable TV
wall jack
O ~o
'\.:.:.;:..:J
O\~O~
~~J ~
(1080V72QpI48Op) 110BM20pl4B0pI4BO;)
Phone wall jack
SATELLITE
IN
Receiving Signals
1. Connect the "Antenna" to the "ANT IN" jack on the DIRECTV® HD Receiver using a coaxial RF cable.
2. Connect the cable TV signal to the "CABLE IN" jack on the DIRECTV HD Receiver using a coaxial RF cable.
3. Connect the "Jack 1" of the multi-switch to the "SATELLITE IN" jack on the DIRECTV HD Receiver using a
coaxial RF cable. (For proper dish installation, refer to the "Installer's Guide" provided with your satellite dish
antenna.)
4. Connect the "Phone Wall Jack" to "PHONE JACK" on the DIRECTV HD Receiver using a phone cable.
While you are subscribing to a DIRECTV® program-
ming package, you can still view over-the-air and
cable TV programs, if you make connections to the
over-the-air and/or cable jacks.
A triple LNB multi-satellite dish with a SAT
C LNB is required to receive all DIRECTV®
High-Definition programming, along with
this DIRECTV HD Receiver.
* Sat Cmay also be connected via a SAT B/SAT Ccombiner with a 4x4 multi-switch (not supplied by Sony). 26