Sony SAT-HD300 Operating Instructions Manual page 107

8..20. Getting the System Informati
System Upgrade
When in Satellite mode, shows you the current software version. If
planned, you will be notified by a pop-up box on your TV screen and the
want to upgrad eyou
I'
system.
T@ lIpgH'ade the ~.mftwan~ i!1
nle
DlRECTV@ HD R®«:ei,;er:
1. Press the MENU button on the Remote Control to the O1HifT811n
IS
a
Q!1t1'1A1::1rP
utlqra(Je
box will ask you if
2. Scroll down using
"V"
on the remote control.
3. Select the System menu by pressing
4. System Info will be automatically highlighted.
!i,
Move the highlight to the right with
"~"
to display the information optior) box,
Ii Scroll down to System Upgrade using
"V",
1. Press" -+- ", then you can see .the current software version on theright
The next version will be seen if OIRECTV plans to upgrade the software.
8. Press the EXllbutton on the remote control to retUrfrto TV
V'C;V\Ill'\J,
The OIRECTV HO Receiver is able to receive upgrades or modifications to some of its features and functions
via satellite service, These modifications will automatically be made, usually at times when the receiver
wouldJikely be turned off. If your receiver is on whenarrupgrade dificationis sen!'voumay experience
a disruption in reception for a minute or two. Your reception should return to normal after the modification is
complete, Your receiver must be plugged in and connected to sateUlte service to receive any upgrades. Please
consult the Upgrade Menu to find a schedule of upgrades or modifications planned by OIREGTV.
(Note: Do not unplug your receiver while an upgrade is in progress, )