Sony SAT-HD300 Operating Instructions Manual page 33

3-6. VCR Connection - VCR Controller
o
S ATELLITE
IN
VCR (front view)
o .
ANT IN
10
2
00
~ "'~r;'.
000
o · . .
L1 L2 Pb
OUTTOTV - ( ; )
000
OPTICAL R1 R2 Pr
10001
@@
O~!!!
~.
VCR Controller
IR Sensor
Connect the VCR Controller to allow the Timer and Rec feature to automatically operate your VCR. See "VCR Control
Setup
II
on page 111 for information about setting up the Digital Satellite Receiver to work with your VCR.
1. Connect the VCR Controller to the VCR CONTROL jack on the DIRECTV® HD Receiver.
2. Place the VCR Controller under and in front of the VCR. The VCR controller must extend just in front of the
infrared sensor of the VCR.
Note: If the infrared sensor is not marked on your VCR, shine a flashlight into the front panel of the VCR to
locate the sensor.
32