Direct Personal Computer Connection - Nokia RoofTop R240 User Manual

To install the Network/ Power Unit

7.3.3 Direct personal computer connection

Connect an Ethernet crossover cable between the Network Interface and
Power Supply Unit and the Personal Computer Ethernet connection. Use
an RJ45 connector at the Network/ Power Unit and the appropriate
connector for the Personal Computer Ethernet connection. See appendix
for wiring diagram for crossover cable.
Connect the Network/ Power Unit, computer and LAN as shown in the
following diagram.
Use one crossover cable whenever a network hub is not being used and
always use it at the PC.
Direct PC connection
Changing the Ethernet configuration from a LAN connection to a
NOTE:
direct PC connection requires changing from a standard Ethernet cable to
a crossover cable.
Nokia RoofTop™ Wireless Router Installation Guide 51