Nokia RoofTop™ Wireless Router Installation Guide
6.
Starting at least 2 inches from the connector, apply the tape, moving
along the cable towards the connector so that it covers the bottom of
the antenna and the top of the connector without gaps and with a layer
of overlapping. This is an area where water can enter the connector
and cable.
NOTE:
Make sure you apply the tape in the direction of the threads.
Covering the directional antenna connection with weatherproof tape
NOTE:
Squeeze the tape against the antenna and connector to remove
any air gaps and apply the tape so that it overlaps half of the width of the
tape.
To install the router
39