Nokia RoofTop™ Wireless Router Installation Guide
3.1.2 To plan the Network/Power Unit location
The Network/ Power Unit can only be physically located by being
plugged into an AC outlet. When locating the AC outlet for the Network/
Power Unit consider:
•
The route of the multiwire cabling
•
The proximity of a telephone connection point (where applicable for
HomePNA) or routing of the Ethernet cable
3.1.3 To plan the cable routing
•
Avoid pipes, downspouts and possible areas which may abrade the
cabling.
For further details see Chapter 6, Routing the cable into the property.
3.1.4 To plan the grounding
Test the existing grounding system at the property. Where the existing
grounding is not acceptable, consider:
•
Route of the grounding cable from the router, avoiding other pipes,
down spouts etc
•
Location for the grounding rod
Main installation steps
19