Nokia RoofTop R240 User Manual page 74

LED Description
Power/ LAN Solid On
Power on, but no ethernet packets seen
Slow Flash
Waiting for the router to complete boot cycle
Intermittent Flash
Off during packet transmit or receive. Otherwise ON
Off
No power or the router is not functioning (IROS is off)
48
5.
Replace the Network/Power Unit cover and replace the screws. Do
not overtighten the screws.
6.
Plug the Network/Power Unit into the wall AC outlet. The LEDs on
the unit should flash three times to indicate that the unit is connected
to the router.
7.
Connect the ethernet cable from the Network/ Power Unit to the PC
or home PNA adapter or network hub.
Shielded ethernet cables must be used on all installations.
NOTE:
The LEDs indicate the following information:
Nokia RoofTop™ Wireless Router Installation Guide