Belling PBi60 Installation And User Instructions Manual page 14

HEAT UP FUNCTION (Fig. 2)
The function heat up allows to set the maximum temperature for a limited period of
time on the cooking zone, then the temperature decreases down to the selected value.
To activate the Heat up function, select the cooking zone, set at 9 the temperature
G
level, press again the key "+" the letter A will appear on the display then with the
"-" key select the desired final temperature level. Until the function is activated, on the
display the A will alternate with the final set up level.
MAGNETIC SENSOR (fig. 2)
The hob is equipped with a pan sensor; when the pan is removed or badly positioned,
G
the symbol will appear;
If, on the other hand, the surface of the glass is still hot, the H symbol will appear.
O.S.D. (Overflow Safety Device) (fig. 2-3-4)
The hob is equipped with a safety system which moves all hotplates to the OFF posi-
tion and activates the safety lock when liquids or items are detected on the control
panel A. These symbols will flash on the display:
They can be deactivated by removing the item or the liquid. The hob will switch off au-
tomatically.
MAINTENANCE
Remove any residues of food and drops of grease from the cooking surface using the
special scraper supplied on request (Fig.5)
Clean the heated area as thoroughly as possible using a ceramic hob cleaner or similar
products and a cloth/paper, then rinse with water and dry with a clean cloth.
Using the special scraper (optional) immediately remove any fragments of aluminium
and plastic material that have unintentionally melted on the heated cooking area or
residues of sugar or food with a high sugar content (Fig.8).
In this way, any damage to the cooktop surface is prevented. Under no circumstances
use abrasive sponges or irritating chemical detergents such as oven sprays or stain re-
movers.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAM-
AGES CAUSED BY BREACHING THE ABOVE WARNINGS.
14