Use & Maintenance - Belling PBi60 Installation And User Instructions Manual

USE AND MAINTENANCE
A = ON/OFF button
B = - button
C = + button
D = Cooking zone selection indicators
E = Cooking zone display
OPERATION (Fig. 2)
If button A is selected, the hob switches on and flashing zeroes with decimal points
G
will appear on all displays for 10 seconds.
If no further action is taken within this space of time, the hob switches off again.
To switch a cooking zone on, simply select the desired power level using the C buttons.
NOTE: each C button corresponds to a cooking zone.
0 will appear on the display, with the fixed decimal point D (no longer flashing); at this
point the zone has been selected.
If button B is used the display will show level 9, while if button C is used, the display
will show level 1.
Once this step is complete you will be able to make temperature adjustments using
G
the "C" and "B" buttons.
If any object has been placed on top of the control panel, the hob will automatically re-
vert to OFF mode.
When a hotplate is in its OFF mode and the temperature of the glass surface is greater
than approximately 65°, a signal light "H" will appear on the corresponding cooking
zone display.
To switch off an individual cooking zone, first select it and then press buttons "C" and
G
"B" simultaneously.
SAFETY LOCK FUNCTION (Fig. 2)
To prevent use the cooker surface by children, it is possible to block all functions by
pressing the S key. This function can be activated only if the hob is switched on.
12