Belling PBi60 Installation And User Instructions Manual page 13

TIMER (Fig. 2)
A Timer can be used simultaneously for each cooking zone.
Select the desired cooking zone by pressing the corresponding C button. Next, select
the desired power level using the + and - buttons. If the T (Timer) button is then
pressed, "00" appears on the display and the LED corresponding to the selected zone
begins to flash. Press button B; a time of 60 minutes will be displayed. If, on
the other hand, you press button T, a time of 1 minute will be displayed. Next, set the
desired time using the T button to increase the value and the B button to decrease
it.
Once the set cooking time has elapsed, the timer switches off and deselects the cook-
ing zones. A buzzer will sound for 2 minutes to indicate that the timer is no longer ac-
tive.
To deactivate it press any key.
G
To know the residual time for each zone, press the key C of the interested zone. To
G
set at zero the timer select the zone and press the T key with the B key.
Caution! While the hob is in operation the timer display remains on, with its value set
to "00".
IMPORTANT: To prevent damage being inlicted on the electronic circuits, the hob is
fitted with an overheating safety system. In situations where the appliance is used
at high power levels for a prolonged period of time, the hob may switchoff one or more
of the activated zones temporarily, until the temperatures return to the set levels. On
the display corresponding to the cooking zone which has been temporarily switched
off, the power level will be shown in alternation with a H E 2.This will stop flashing
once the cooking zone has beenreactivated.
MINUTE MINDER FUNCTION (Fig. 2)
Unlock the cooking surface by keeping the "key button" S pressed down for 3 seconds
G
until the "indicator light button" is switched off.
Press the "Timer" (T) button until the writing "00" appears on the display.
G
Press T or B to select the number of the minutes.
G
Press the "Timer" button to confirm the selection. At the end of the set time, an
G
acoustic signal will be activated.
13