Charging Tips; Charging Status - Polycom SpectraLink 1725-36092-001 User Manual

Polycom® SpectraLink® 6020 Wireless Handset User Guide
• Any battery which exhibits swelling, cracking or other abnormality should be disposed of
promptly and properly.

Charging Tips

• Overnight charging is best done while the handset is turned off.
•
If the handset does not charge, clean Battery Pack, charger and handset contacts.
• If multiple Battery Packs are supplied with your handset, Polycom recommends that each be
fully charged upon receipt to prolong battery life. Battery Packs will slowly lose charge if
unused. To maintain battery potential, charge unused Battery Packs occasionally or alternate
Battery Pack use.

Charging Status

The handset display and the LED on the Dual and Quad Chargers indicate whether or not charging is
occurring or completed or if a Battery Pack failure has been detected.*
The Single Charger does not have an LED indicator.
Handset/LED Charging Status
Charging... The Battery Pack in the handset is charging.
LED Solid On
Note that in the Dual Charger, the handset's Battery Pack
takes charging precedence, and when it is finished
charging, the single Battery Pack in the rear slot will
charge.
Charge Complete The Battery Pack in the handset has finished charging.
LED Off Battery Pack fully charged, empty slot, or unit is not
powered.
Battery Failure Error. Battery Pack not able to be charged. Reinsert
LED Flash Battery Pack or replace Battery Pack.
October, 2011 | 1725-36729-001_D.docx 17