Polycom M2616 Quick Reference Manual

LINE + 0
HOLD
M2616 Station Set
Pressing LINE followed by a digit (1-7) on the Wireless
Telephone is equivalent to pressing one of the line keys
on the M2616 (Keys 0-6).
LINE + 8 is reserved for local programming, as on the
station set. LINE + 0 is equivalent to the RLS button.
Pressing FCN followed by a digit (2-9) on the Wireless
Telephone is equivalent to pressing one of the dual
memory buttons on the M2616 (Keys 8-15).
Function Key Default
Strokes Settings
FCN + 1 MUTE
FCN + 2 XFER
FCN + 3 CONF
FCN + 4 LAST NO
FCN + 5 FWD
FCN + 6 MSG
FCN + 7 PICK
FCN + 8 RING AGAIN
FCN + 9 EXIT MENUS
LINE + 0 RLS
1725-36156-001_E Meridian is a trademark of Nortel Networks
LINE + 8
FCN + 9
LINE + 7
FCN + 8
LINE + 6
FCN + 7
LINE + 5
FCN + 6
FCN + 5 LINE + 4
FCN + 4 LINE + 3
LINE + 2
FCN + 3
FCN + 2 LINE + 1
Fill In Your
Feature Settings
Wireless Telephone Quick Reference Guide
SpectraLink 6020 Wireless Telephone
On/Off Press and hold END. Two
chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
Answer Press HOLD to put your current
second call call on hold, or END to hang up.
Press LINE + the digit that is
flashing.
Hold Press HOLD
Take off Hold Press LINE followed by the digit
for the line on hold, which will be
flashing.
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook
allows you to scroll through
menu screens.
User Options Press the CFG softkey while on
hook to change handset
settings.
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
For technical support, please contact
your facility's Network Administrator.
Nortel Meridian
M2616 Station Set