Toshiba RAV-SM304MUT-E Service Manual page 71

8-1-4. Function Selection Setup
<Procedure> Perform setting while the air conditioner stops.
1
TEST SET
Push + +
The first displayed unit No. is the master indoor unit address in the group control.
In this time, fan and louver of the selected indoor unit operate.
2
Every pushing
displayed one after the other. In this time, fan and louver of the selected indoor unit only
operate.
3
Using the set temperature
4
Using the timer time
5
SET
Push button. (OK if indication lights)
• To change the selected indoor unit, proceed to Procedure
• To change item to be set up, proceed to Procedure
6
TEST
Pushing button returns the status to the normal stop status.
AMP Air Conditioning
CL
buttons simultaneously for 4 seconds or more.
UNIT LOUVER button (button at left side), the indoor unit No. in the group control is
buttons, specify the CODE No. (DN).
TEMP.
TIME
buttons, select the set data.
TEMP.
3
6
FILTER L L
RESET TEST
1
<Operation procedure>
1 2 3
2
.
3
.
ON / OFF
TIMER SET FAN MODE
TIME SAVE A A VENT
SET CL SWING/FIX UNIT LOUVER T
4 5 6
END
– 71 –
www.ampair.co.uk | sales@ampair.co.uk
4
5
2