Belling E641 Installation And User Instructions Manual page 23

Allow the hob to cool.
Use a dampened paper towel or clean
d a m p cloth to apply a small dab of
cleaner conditioner to clean each
heating area.
Use another paper towel or a clean
dry soft cloth to wipe dry, and then
polish the whole glass surface.
To remove any stubborn marks or
heavy soiling, a non scratching, mild
cream cleaner may be used - eg;
"Cif". Alternatively, a ceramic hob
scraper may be used.
Important: If you use a wet paper
towel or clean damp cloth to remove
spillage from a warm heating area of
the hob, be careful to avoid steam
burns.
Care and maintenance
Before using the hob for the
first time, apply a thin coating of
cleaner conditioner to the ceramic
glass, and polish the surface with a
clean cloth.
The conditioner gives a protective
covering to the ceramic glass which
not only makes the hob easier to
clean, but also ensures that you will
gain maximum life out of this product.
Occasional use will help prevent the
build up of mineral deposits which can
cause discolouration of the hob sur-
face.
Cleaning
Discolouration of the hob
Do not use a dishcloth or dish sponge
to wipe the hob - this can leave a film
of detergent on the surface which will
discolour the hob next time a heating
area is used. Clean cloths kept for the
cleaning of the hob can be used.
Do not use too much cleaner condi-
tioner - only a thin coating is required,
any excess may burn on and discolour
the hob when it is next in use.
If persistent stains or marks remain on
the ceramic glass surface, it can be
cleaned using a mild cream cleaner -
eg; "Cif" - or a ceramic hob scraper.
This will also remove any accumulated
salts or minerals before they have an
opportunity to discolour the ceramic
glass.
Wipe clean with a damp paper towel
or clean damp cloth and re-apply
cleaner conditioner.
22