Led Class; Radio Compliance - Datalogic Lynx 00N0LD-1N0-MEN0 User Manual

Table of Contents

Advertisement

2.4

LED CLASS

LED illuminators integrated in the LYNX models with SE-4500 imager engine
are compliant with exempt risk group requirements according to IEC62471:2006
and EN62471:2008.
Flash LED integrated in the LYNX models with camera is blue light hazard risk
group 1 according to IEC62471:2006 and EN62471:2008
2.5

RADIO COMPLIANCE

In radio systems configured with mobile computers and access points, the
frequencies to be used must be allowed by the spectrum authorities of the
specific country in which the installation takes place. Be absolutely sure that the
system frequencies are correctly set to be compliant with the spectrum
requirements of the country.
The Radio modules used in this product automatically adapt to the frequencies
set by the system and do not require any parameter settings.
The TYPE field shows the correspondence between LYNX™ types and radio
modules:
TYPE: ABCDEE-FGH-IJJK-LMMMM
A: "0" if WWAN module is not present, "E" for GSM/GPRS/EDGE WWAN
module, "U" for UMTS/HSDPA WWAN module, "H" for UMTS HSPA+ Voice and
Data
B: "0" if GPS module is not present
C: "0" if IEEE 802.11 module is not present, "A" for IEEE 802.11 abg module,
"G" for IEEE 802.11 bg module, "N" for IEEE 802.11 bgn module
D: "0" if RFID module is not present.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents