Led Indicators; Battery Pack Leds - Datalogic Skorpio X5 User Manual

GETTING STARTED

LED INDICATORS

The LEDs illuminate to indicate various functions or errors on the device. The following
table lists these indications. The good read LED indicator is programmable, and may or
may not be enabled ("
configurable via SDK.
LED
Charging Status/
Android Notifica-
tions LED
Good Read Indicator

Battery Pack LEDs

The battery pack LEDs indicators notify the battery charge level, the battery health and
the power failures. To activate the LED indicators and display the battery status informa-
tion, remove the battery pack from the Skorpio X5 or from the 4 Slot Battery Charger
and press the locking lever:
The label on the battery pack indicates the meaning of the LEDs color:
32
SKORPIO™ X5
Scanner Settings" on page 40
Status
Solid red
Solid orange
Solid green
Blinking red
Blinking blue (the
color could change
depending on Android
settings)
Solid red
Solid green
Blinking green fading
to red through orange
for more details). The Charging LED is
Description
The device is in pre-charge status.
The device is charging.
Charging is complete.
Charge fault.
Android notification.
Light is solid red from the time the user
presses the scan key until the barcode
is decoded, until the scanner times out,
or until the user releases the scan key.
A good decode is completed.
Battery swap mode.