Bar Code Parameters - Datalogic Lynx 00N0LD-1N0-MEN0 User Manual

BAR CODE PARAMETERS

The following table lists the standard customer programmable settings for the
Lynx™:
Codabar
Code
Description
Parameter
Enables/disables the
Enable
Codabar symbology.
Enables more aggressive
Enable
decoding algorithms to be
Aggressive
used in order to scan hard
Decoding
to read labels.
Requires the use of
Enable
checksum characters to
Checksum
verify a bar code.
Instructs the terminal to
Send
include the checksum in
Checksum
the label transmission.
Instructs the decoder to
transmit the decoded start
and stop characters of
Send Start/
Codabar labels. The start
Stop
and stop characters will
both be translated as A, B,
C, or D.
Restricts the Codabar
decoder to only read
labels that conforms to
CLSI specifications. Label
Convert to
length must be 14, and the
CLSI
data is split into fields of 1,
4, 5, and 4 characters
separated by spaces.
Allows wide gaps to
Allow Wide
appear between
Intercharacter
characters in a label.
Gaps
Set the minimum label
Minimum
length to be less than or
Label
equal to maximum label
Length
length.
Defaults
Accept.
I.D.#
Input
Enter 1 for On and 0 for Off
0300 On or Off Off
0301 On or Off Off
0302 On or Off Off
0303 On or Off Off
0305 On or Off Off
0306 On or Off Off
0307 On or Off Off
0320 01 - 50 01
Scanner Type
On On √ √ √
On Off √
Off Off √ √ √
Off Off √ √ √
On Off √ √ √
Off Off √ √ √
On On √ √
01 04 √ √ √