Datalogic Firmware Utility; Retrieving A Firmware Image Update - Datalogic Lynx 00N0LD-1N0-MEN0 User Manual

1.9

DATALOGIC FIRMWARE UTILITY

The Datalogic devices are equipped with a field upgradeable firmware mechanism.
Firmware updates
(http://www.adc.datalogic.com/). After you have downloaded the desired update,
there are several ways you can update the firmware on your device.

Use Wavelink Avalanche™ if you have multiple Datalogic ADC devices to
update. Refer to the Product CD included with your device for more
information.

If Wavelink Avalanche™ is not available or you have only a few Datalogic ADC
devices to update, use the Datalogic Firmware Utility (DFU), described below,
to install or update the firmware using an ActiveSync connection.
The following sections provide procedures for the retrieval and installation of the
most current firmware image onto a Datalogic device.
1.9.1

Retrieving a Firmware Image Update

The following instructions use Internet Explorer to retrieve the most current firmware
image.
1. Launch Internet Explorer on your PC and navigate to the Datalogic ADC
website.
2. Navigate to the Downloads section of the website.
3. Select the file you want to download, then click Save to begin copying the files
to your local machine (or local network location).
are available on the Datalogic ADC website