D-Link DSA-3100 User Manual page 29

DSA-3100 Wireless Service Gateway User Manual
To delete specific users accounts, click on the checkboxes besides those user
accounts then click the Delete button. To delete all user accounts, click Delete All.
(3.) Upload User Account:
Besides adding user accounts one by one through the web interface, you
could prepare a text file, which contains user account information, and upload it
to the DSA-3100. As the below figure shows, the DSA-3100 provides you a way
to upload user account data. The user account data file is a text file. Each line of
the text file contains one user account data. Each line is of the of the following
two formats:
Please note that there must be no space or other characters between the
user ID, password and the MAC address. The MAC address could be omitted,
but the trailing comma must be retained. A user ID should be between 1 to 32
characters and the password should be between 0 to 20 characters. Special
characters are not allowed for user name and password.
Caution: When adding user accounts by uploading a file, existing accounts
in the embedded database that are also defined in the data file will be replaced
by the new ones. Other existing accounts are not affected.
2.) POP3: To use POP3 as the authentication method, just input the POP3 server IP
address or domain name and its POP3 server port. The settings will take effect
immediately after you click the Apply button. However, it is recommended that you
restart the DSA-3100 after these changes if there is any on-line user
26
UserID, Password, MAC
UserID, Password,
.