Procedure - D-Link DSA-3100 User Manual

DSA-3100 Wireless Service Gateway User Manual
2、Procedure
a、Ensure the DSA-3100 are power OFF.
b、WAN port connection
Use 10/100BaseT connections to connect the Unmanaged Network. The Unmanaged
Network's interface maybe ADSL Router's LAN port, Cable Modem's LAN port or Intranet
Switch port.
c、Local Network port connection
Use 10/100BaseT connections to connect your admin PC with the internal Switch or Hub that
connected to the Local Network Port on DSA-3100. If you want to directly connect the
DSA-3100 to this PC or the wireless AP, you have to use a Cross Over Line.
d、Authentication port connection
Use 10/100BaseT connections to connect your client PC with the internal Switch or Hub that
connected to the Authentication Port on DSA-3100. If you want to directly connect the
DSA-3100 to this PC or the wireless AP, you have to use a Cross Over Line.
e、Power up
Connect the supplied power adapter to the DSA-3100 and power up.
f、Check the LED
The Power Indicator and WAN Indicator should be ON, if the corresponding WAN Port was
connected to an Unmanaged Network.
The corresponding Local Network or Authentication Indicator should be ON while a network
device connected to the Local Network Port or the Authentication Internal Port.
7