D-Link DSA-3100 User Manual page 32

DSA-3100 Wireless Service Gateway User Manual
Access Points:
Please specify the Primary and Secondary RADIUS server IP address (Some
APs may have different wording such as IAS server or authentication server etc.)
to the IP address of "Authentication" port on DSA-3100.
The corresponding secrets for each AP should match the settings in DSA-3100
just as the values, as shown in sample figure below:
Note: If you are using the 802.1x supplicant provided by Microsoft, the idle time out
will be the longer one of the settings in RADIUS/AP and DSA-3100. Except the idle
timer, there is no way for user to logoff from the 802.1x AP in the current 802.1x
implementation by Microsoft.
4.) LDAP: To use LDAP as the authentication method, just input the LDAP server IP
address or domain name and its LDAP server port. The settings will take effect
immediately after you click the Apply button. However, it is recommended that you
restart the DSA-3100 after these changes if there is any on-line user
.
29