Turn on and off
1. To turn on, either:
• Connect the battery
(see page 9), or
• If the battery is already
connected, short-press
the button.
2. To turn off, either:
• Disconnect the battery
(see page 8), or
• Press and hold the
button for 5 seconds.
The light will change to
steady orange as the
processor turns off.
NOTE
Your processor will also turn off automatically after being off
your implant for two minutes, if enabled by your clinician.
20
NUCLEUS 7 SOUND PROCESSOR USER GUIDE
Need help?
Do you have a question about the Nucleus 7 and is the answer not in the manual?