Cochlear Nucleus 7 User Manual page 11
Hide thumbs
Also See for Nucleus 7:
- Getting started (40 pages) ,
- Quick manual (17 pages) ,
- User manual (15 pages)
Table of Contents
Advertisement
Attach the battery module
1. Fit the parts together with the battery module at a slight
angle to the processor socket.
Rechargeable battery module:
align raised marker and arrow on
battery module towards back of
processing unit
2. Twist the battery module
as shown to attach the
parts.
Your processor will turn on
automatically.
NOTE
If you do not put your processor on your implant, it will turn off
automatically after two minutes, if enabled by your clinician.
NUCLEUS 7 SOUND PROCESSOR USER GUIDE
Disposable battery module:
align indents and lock on battery
module towards back of
processing unit
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Nucleus 7 and is the answer not in the manual?
Questions and answers
Здравствуйте. У ребенка нуклеус 7 для постоянного ношения и нуклус 6 для бассейна. Сегодня при подключении катушки к импланту зеленый индикатор не загорается ни на одном аппарате. Что это значит? Ребенок не говорящий, что он чувствует не понимаю.
If the green indicator does not light up on both the Cochlear Nucleus 7 and Nucleus 6 when connecting the coil to the implant, it may mean one of the following:
1. The rechargeable battery module is not properly connected.
2. The battery module is over-discharged.
3. The battery module is faulty—try a different module.
4. There is no power to the USB port—check the power supply.
This answer is automatically generated