Rear Panel; Enabling Remote Access; Configuring The Unit To Connect To The Network - Polycom READIMANAGER LX100 Getting Started Manual

P R M
OLYCOM EADI ANAGER

Rear Panel

Enabling Remote Access

Configuring the Unit to Connect to the Network

6
LX100 G S G
ETTING TARTED
Item
1 Power
2 PS/2 port
3 USB 0/1
Ports
4 COM1 Port
5 Parallel Port
6 Monitor
7 LAN1
8 LAN2
Before the Polycom ReadiManager LX100 can be configured for scheduling or
device management, the unit needs to be configured and connected to the
network. Once these tasks are accomplished, the unit can be accessed
remotely from any web browser within your network.
There are two main steps to configuring your ReadiManager LX100 for remote
web access:
Physically connecting the units
Configuring the network settings
There are two ways of enabling remote access of the unit: connecting the unit
to a PC with a crossover cable or connecting the unit to a hub along with a PC
connected to the same hub.
Required Components
UIDE
Function
Connects to power
Mouse – Green
Keyboard - Purple
Universal Serial Bus port
RS-232 port
Printer cable port
VGA monitor port
Ethernet port for connecting to the network.
Disabled