When editing or adding a new network group, users will have three tabs to configure:
•
Basic: Used to name the network group, and set a VLAN ID if adding a new network group
•
Wi-Fi: Please refer to the below table for Wi-Fi tab options
Field
Enable Wi-Fi
SSID
SSID Band
SSID Hidden
Wireless Client Limit
Enable Captive Portal
Figure 22: Add a New Network Group
Table 7: Wi-Fi
Description
Check to enable Wi-Fi for the network group.
Set or modify the SSID name.
Select the Wi-Fi band the GWN will use, three options are available:
•
Dual-Band
•
2.4GHz
•
5Ghz
Select to hide SSID. SSID will not be visible when scanning for Wi-Fi, to
connect a device to hidden SSID, users need to specify SSID name and
authentication password manually.
Configure the limit for wireless client. If there's an SSID per-radio on a
network group, each SSID will have the same limit. So, setting a limit of 50
will limit each SSID to 50 users independently.
If set to 0 the limit is disabled.
Check to enable/disable captive portal
GWN7600LR User Manual
P a g e
|
35