Grandstream Networks GWN7600LR User Manual page 36

Captive Portal Policy
Security Mode
WPA Key Mode
WPA Encryption Type
WPA Pre – Shared Key
RADIUS Server Address
RADIUS Server Port
RADIUS Server Secret
RADIUS Accounting Server
Address
RADIUS Accounting Server
Port
Select the captive portal policy already created on the "CAPTIVE
PORTAL" web page to be used in the created SSID.
Set the security mode for encryption, 5 options are available:
•
WEP 64-bit: Using a static WEP key. The characters can only be
0-9 or A-F with a length of 10, or printable ASCII characters with a
length of 5.
•
WEP 128-bit: Using a static WEP key. The characters can only be
0-9 or A-F with a length of 26, or printable ASCII characters with a
length of 13.
•
WPA/WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with
"AES" or "AES/TKIP" Encryption Type.
•
WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with "AES" or
"AES/TKIP" Encryption Type. Recommended configuration for
authentication.
•
Open: No password is required. Users will be connected without
authentication. Not recommended for security reasons
Two modes are available:
•
PSK: Use a pre-shared key to authenticate to the Wi-Fi.
•
802.1X: Use a RADIUS server to authenticate to the Wi-Fi.
Two modes are available:
•
AES: This method changes dynamically the encryption keys
making them nearly impossible to circumvent.
•
AES/TKIP: use both Temporal Key Integrity Protocol and
Advanced Encryption Standard for encryption, this provides the
most reliable security.
Set the access key for the clients, and the input range should be: 8-63
ASCII characters or 8-64 hex characters.
Enter the RADIUS server IP or FQDN address.
Enter the RADIUS server port. The default port is 1812.
Enter the shared secret between the authenticator and the RADIUS
server.
Enter the RADIUS Accounting server IP or FQDN address.
Enter the RADIUS Accounting server port. The default port is 1813.
GWN7600LR User Manual
P a g e | 36