Operating Modes; Operating Modes That Allow For Manual Switchover - Siemens RDS110 User Manual

6.2 Operating modes

6.2.1 Operating modes that allow for manual switchover

Siemens
Building Technologies
Operating modes that allow for manual switchover
Operating mode overview
Operating Description
mode
At home You can use this mode when you stay at home or inside the
room where the thermostat is located.
When the thermostat operates under this mode, you can toggle When the thermostat operates under this mode, you can toggle
to
scheduler, or toggle to
specified setpoint permanently. See Thermostat display overview
[| 14] for more detailed information about how the thermostat for more detailed information about how the thermostat
works when
AWAY
This mode helps save energy. You can use this mode when you This mode helps save energy. You can use this mode when you
are away from home or outside the room where the thermostat is
located.
The temperature setpoint maintained under this mode is the The temperature setpoint maintained under this mode is the
same with that scheduled in Economy mode using the mobile
app. Deactivation of this mode switches the thermostat to the app. Deactivation of this mode switches the thermostat to the
scheduler you've set (if you haven't set one, the thermostat works
following a default scheduler).
OFF
Depending on how you've set up the thermostat, this mode can Depending on how you've set up the thermostat, this mode can
mean one of the following:
● Your heating equipment turns off completely.
● Your thermostat only works to maintain the system's Your thermostat only works to maintain the system's
protection setpoint so that your heating equipment is not
destroyed if the room air temperature is too low, or if the air is destroyed if the room air temperature is too low, or if the air is
too humidified or dry. For more information about the too humidified or dry. For more information about the
protection setpoint, see Managing application settings [
Deactivation of this mode switches the thermostat to the
scheduler you've set (if you haven't set one, the thermostat scheduler you've set (if you haven't set one, the thermostat
follows a default scheduler).
To switch to the OFF mode
● From the Home screen, tap
NOTE: To awake your thermostat from the OFF mode, tap the screen.
To change the thermostat behavior under the OFF mode
1. From the Home screen, tap
2. If prompted, enter the administrator password.
3. Tap > , and then tap Off/protection configuration.
4. Tap either Off or Protection.
To switch between At home and AWAY modes
● From the Home screen, tap
● Tap to switch from AWAY to At home.
Operating your thermostat from the hardware unit Operating your thermostat from the hardware unit
to let the thermostat run automatically following a to let the thermostat run automatically following a
to let the thermostat operate at a to let the thermostat operate at a
or is toggled on.
ion setpoint so that your heating equipment is not
naging application settings
, and then tap OFF on the Operation mode
mode, tap the screen.
, then tap and .
to switch from At home to AWAY.
Operating modes Operating modes
or inside the
Thermostat display overview
oom where the thermostat is
mode using the mobile
one, the thermostat works
[|
ermostat to the
Operation mode page.
mode
.
21 | 54
A6V10877569_en--_a A6V10877569_en
2017-09-08
6
27].