Operating Modes; Operating Modes Overview - Siemens RDS120 User Manual

Smart thermostat
Hide thumbs Also See for RDS120:
Table of Contents

Advertisement

4.2 Operating modes

4.2.1 Operating modes overview

A6V10733807_enUS_c
Operating the thermostat from the thermostat main unit
Operating
Description
mode
At home
This mode lets the thermostat know the space is now occupied.
Within this mode, you can choose
follows a schedule, or toggle to
operate at a specified setpoint indefinitely. See Thermostat
display overview [➙ 7] for more detailed information about how
the thermostat operates in
AWAY
This mode lets the thermostat know that space is no longer
occupied and switches to the energy saving mode; the same as
set up in Unoccupied mode using the mobile app.
AUTO
This commands the thermostat and the controlled HVAC system
to switch between heating and cooling. This is the default
setting.
NOTE: it is different from
information about the functions of
a schedule [➙ 16].
Puts thermostat and the controlled HVAC system into Heating
HEAT ( )
only operation.
Puts the thermostat and the controlled HVAC system into
COOL (
)
Cooling only operation.
OFF
Depending on thermostat setup, this mode results in:
Controlled HVAC system turns off completely.
The thermostat is set to maintain the space within preset
limits to avoid frost or heat damage or excessively low or
high humidity. For more information about the protection
setpoint, see Commissioning.
NOTE: If the heating or cooling stage is set to zero during the initial setup, OFF
mode is the only available option from the Operating mode page.
Switch to OFF mode
From the Home screen, tap
NOTE: To awake the thermostat from the OFF mode, tap the screen.
Change thermostat behavior in OFF mode
1. From the Home screen, tap
2. If prompted, enter the administrator password.
3. Tap , tap
, and then tap Off/protection configuration.
4. Tap either Off or Off/protection configuration.
Switch between At home and AWAY modes
From the Home screen, tap
Tap
to switch from AWAY to At home.
Change the default AUTO mode
1. From the Home screen, tap
2. On the Operating mode page, tap either HEAT ( ), COOL ( ) or OFF.
where the thermostat
and have the thermostat
or
.
on the Home screen. For more
, see Operating modes in
, and then tap OFF on the Operating mode page.
, tap and then tap .
to switch from At home to AWAY.
.
4
Operating modes
15 | 40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rds120.b

Table of Contents