Operating The Thermostat On The Device; Temperature Control; Operating Modes - Siemens RDS110.R User Manual

6

Operating the thermostat on the device

Temperature control

6 Operating the thermostat on the device
6.1 Temperature control

6.2 Operating modes

24 | 60
The thermostat acquires the room temperature using the built-in sensor and/or the
external room temperature sensor, and maintains the setpoint by delivering control
commands to heating and/or cooling equipment. On the home screen, the current
room temperature is displayed and the temperature setpoint can be changed as
desired. The temperature unit can be switched between ° C and ° F.
Adjust the temperature setpoint on the home screen
●
On the Home screen, drag the temperature slider to the right to increase the
temperature setpoint, or to the left to decrease the temperature setpoint.
Change the temperature unit
1. On the Home screen, tap
2. Tap , then tap to change from Celsius to Fahrenheit, or tap
from Fahrenheit to Celsius.
The thermostat can operate in different modes:
●
OFF vs. HEAT. If the space is not occupied for a long time, you can switch the
thermostat to "OFF" instead of keeping the thermostat running under the
"HEAT" mode. The thermostat will only ensure that the room temperature does
not drop below the protection temperature setpoint.
● At home vs. AWAY. Use "AWAY" when the space is not occupied for a few
days. The thermostat will always maintain the "Unoccupied" temperature
setpoint.
●
Auto ( ) vs. manual (
maximum energy savings by using your own time schedule.
, and then tap .
). Use to ensure optimal comfort with
to change
A6V11562455_en--_d