Operating Modes - Siemens RDS110 User Manual

Smart thermostat
Hide thumbs Also See for RDS110:
Table of Contents

Advertisement

6
Operating the thermostat on the device

Operating modes

6.2 Operating modes
6.2.1 Operating modes with manual switchover
22 | 59
Operating mode overview
Operating
Description
mode
At home
You can use this mode when you stay at home or inside the
room where the thermostat is located.
When the thermostat operates under this mode, you can toggle
to
scheduler, or toggle to
specified setpoint permanently. See Thermostat display overview
[➙ 15] for more detailed information about how the thermostat
works when
AWAY
This mode helps save energy. You can use this mode when you
are away from home or outside the room where the thermostat is
located.
The temperature setpoint maintained under this mode is the
same with that scheduled in "Unoccupied" mode using the mobile
app. Deactivation of this mode switches the thermostat to the
scheduler you've set (if you haven't set one, the thermostat works
following a default scheduler).
Depending on how you've set up the thermostat, this mode can
OFF
mean one of the following:
Your heating equipment turns off completely.
Your thermostat only works to maintain the system's
protection setpoint so that your heating equipment is not
destroyed if the room air temperature is too low, or if the air is
too humidified or dry. For more information about the
protection setpoint, see Managing application settings [➙ 28].
Deactivation of this mode switches the thermostat to the
scheduler you've set (if you haven't set one, the thermostat
follows a default scheduler).
Switch to the "OFF" mode
On the Home screen, tap
page.
NOTE: To awake your thermostat from the "OFF" mode, tap the screen.
Change the thermostat behavior under the "OFF" mode
1. On the Home screen, tap
2. When prompted, enter the administrator password.
, and then tap "Off/protection configuration".
3. Tap
>
4. Tap either "Off" or "Protection".
Switch between "At home" and "AWAY" modes
On the Home screen, tap
to switch from "AWAY" to "At home".
Tap
to let the thermostat run automatically following a
to let the thermostat operate at a
or
is toggled on.
, and then tap "OFF" on the "Operating mode"
, then tap and .
to switch from "At home" to "AWAY".
A6V10877569_en--_f

Advertisement

Table of Contents
loading

Table of Contents