Checking The Basic Information About Your Thermostat; Software Updates - Siemens RDS110 User Manual

Resetting the thermostat

6.7.4 Checking the basic information about your thermostat

6.8 Software updates

Siemens
Building Technologies
*) If you've selected 0...10 V as the signal type, you must connect a DC
active sensor with the thermostat. Otherwise, the calculated value ma active sensor with the thermostat. Otherwise, the calculated value may not be
accurate.
To change extended configurations
1. On the Advanced settings page, tap .
2. If prompted, enter the administrator password.
3. Tap > .
4. Tap OK to stop all the thermostat's applications. The thermostat restarts. to stop all the thermostat's applications. The thermostat restarts.
5. After the restart is completed, tap I/O > Adapt.
6. Change the settings as desired.
You can reset the thermostat to its original factory settings. However, all user data You can reset the thermostat to its original factory settings. However, all user data
will be erased after the factory resetting.
To perform a factory reset
1. On the Advanced settings page, tap .
2. If prompted, enter the administrator password.
3. Tap > .
4. Tap OK to stop all of your thermostat's applications. Your thermostat restarts. to stop all of your thermostat's applications. Your thermostat restarts.
5. After the restart is completed, tap Factory reset.
6. Tap Reset. The thermostat is reset and restarted.
NOTE: After the thermostat is restarted, the setup wizard appears for easy After the thermostat is restarted, the setup wizard appears for easy
commissioning. Refer to the
the basic information about your thermostat
You can check the following information about your thermostat:
● Model name
● Activation code and serial number of the thermostat
● Software and hardware version
● MAC and IP address
● Application used in the thermostat
To check the basic information about your thermostat
1. From the Home screen, tap
2. If prompted, enter the administrator password.
3. Tap > . Detailed information about your thermostat displays. . Detailed information about your thermostat displays.
The thermostat receives updates to get the latest functionality, enhancements and
bug fixes so that it has optimal performance. Normally, the updates occur bug fixes so that it has optimal performance. Normally, the updates occur
automatically through WLAN connection. It works in the background and doesn't automatically through WLAN connection. It works in the background and doesn't
affect your normal usage on the thermostat.
NOTE: During software updates, the system reboot(s) occurs automatically, During software updates, the system reboot(s) occurs automatically,
however, no previous settings are changed.
Operating your thermostat from the hardware unit Operating your thermostat from the hardware unit
V as the signal type, you must connect a DC 0..10 V
Quick guide for the detailed setup information. for the detailed setup information.
, then tap and .
to get the latest functionality, enhancements and
6
Software updates Software updates
37 | 54
A6V10877569_en--_a A6V10877569_en
2017-09-08