Siemens RDS110 User Manual page 23

Siemens
Building Technologies
– From the Home screen, tap
displays.
– Tap > , and then wait for the thermostat to discover the networks
nearby.
– Tap your desired network. If necessary, tap
networks to select one.
4. For secured networks, enter the relevant password, and then tap Connect.
Note: For more information about the administrator password, see Creating an
administrator password
To add a network manually
1. If the thermostat is selected for commercial use:
– On the Advanced settings page, tap
to find and tap Add network.
2. If the thermostat is selected for home use:
– On the Settings page, tap
tap Add network.
3. Enter the Network name (SSID) information.
4. To select a security type, tap the Security field.
5. Tap Connect.
6. If prompted, enter the relevant password, and then tap Connect.
To configure your current network settings
1. If the thermostat is selected for commercial use:
– On the Advanced settings page, tap
on the screen.
2. If the thermostat is selected for home use:
– On the Settings page, tap
screen.
3. Tap Network settings. The default DHCP (Dynamic host configuration protocol)
setting page displays on the screen.
– If necessary, tap
settings like Preferred DNS.
– If you want to customize the current network settings, tap Manual, select a
field, or tap or
setting.
Connecting to a network via the push button
If you have little knowledge about wireless security, using the push button method
makes it easy for you to establish a secure wireless network connection. If you
want to use this method, you must have a WPS (Wi-Fi Protected Setup) compatible
router.
To connect to a network using the push button
1. If the thermostat is selected for commercial use:
– On the Advanced settings page, tap
button setup.
2. If the thermostat is selected for home use:
Operating your thermostat from the hardware unit
, and then tap until the Settings page
[| 24].
>
> , and then tap
>
> . Your current network displays on the
or to scroll through and view other network DHCP
to scroll to the desired field, and then enter a new
>
WLAN connection
or to scroll through the
, and then tap to scroll down
to scroll down to find and
. Your current network displays
, then tap until you see Push
A6V10877569_en--_a
2017-09-08
6
23 | 54