Viavi HST-3000 User Manual page 67

Connecting to a After launching the software, you can connect to a specific
HST HST.
To connect to a HST
– On the PC, locate the desired HST in the scan list, and
Pairing the HST If your HST has not been used with the software before, it will
not appear in the scan list. You must pair the HST with the PC.
If you have previously paired your HST to the PC, go to
"Connecting to a HST"
Pairing one device (a PC) to another (the HST) ensures that
all communication between the two is encrypted and no unau-
thorized devices can take control.
To pair the HST
1 Press the System soft key and then check the Instru-
HST-3000 Base Unit User's Guide
Chapter 4 Instrument Settings and User Preferences
then click View Unit.
If the unit is paired, the HST screen appears.
If the unit is not paired, a window opens asking if you
would like to pair with the unit. See
ment>Ports menu. If the Bluetooth soft key does not
appear, you need an external Bluetooth dongle. Connect
it to the USB connector on the top of the HST-3000.
Accessing a remote HST-3000
"Pairing the HST".
47